Archive for the 'Mac' Category

Running Apache Directory Studio on Apple M1.. cleanly!

Tags: , , , ,

There have been dozens and dozens of posts attempting plenty of weird, unsupportable hacks and workarounds to get ADS working under the ARM cores used by the Apple M1/M2 chipsets. You need a few dependencies installed and configured to get this working, and Rosetta2 does not work in this situation.

Simply installing Apache Directory Studio from their download page or brew, will result in the following error message when you try to launch it:

This is because the version of Java installed via the OS or from Oracle’s own download page, will not work when it’s the native ARM or aarch64 version.

There are many posts that include installing the version of Java from temurin but that too, will give you the wrong version of the JDK to make this work.

brew install --cask temurin

You need at least Java version 11 in order to run Apache Directory Studio, but version 20 will also work, with the steps here.

Also, editing the path in the Info.plist in /Applications/ApacheDirectoryStudio.app/Contents/Info.plist to point to the temurin JDK, will also fail.

There’s an XML block at the bottom of the file that implies you can just point to a different java version you have installed and it will use that. It does, but then crashes with the following dialog, even with the temurin version installed:

<!-- to use a specific Java version (instead of the platform's default) uncomment one of the following options, or add a VM found via $/usr/libexec/java_home -V
    <string>-vm</string><string>/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Commands/java</string>
    <string>-vm</string><string>/Library/Java/JavaVirtualMachines/1.8.0.jdk/Contents/Home/bin/java</string>
-->

To see the versions of Java you may have installed, you can run:

$ /usr/libexec/java_home -V
Matching Java Virtual Machines (3):
    20 (arm64) "Oracle Corporation" - "Java SE 20" /Library/Java/JavaVirtualMachines/jdk-20.jdk/Contents/Home
    20 (x86_64) "Eclipse Adoptium" - "OpenJDK 20" /Library/Java/JavaVirtualMachines/temurin-20.jdk/Contents/Home
    17.0.6 (arm64) "Oracle Corporation" - "Java SE 17.0.6" /Library/Java/JavaVirtualMachines/jdk-17.jdk/Contents/Home
/Library/Java/JavaVirtualMachines/jdk-20.jdk/Contents/Home

Ok, enough of the context of the failures… let’s get on to fixing this. You can leave the line you edited into your Contents/Info.plist and let’s get the right version of the JDK installed. The version we install will just replace the version in that same directory, and you won’t need to change it (unless you get a different version of Java in these steps).

Even the Oracle installer refuses to continue when using the x86_64 version:

Instead of installing temurn using brew reinstall --cask temurin, you’ll want to visit the Adoptium Temurin download page and grab the version for x86_64, not aarch64, as you normally would get with brew or the Oracle downloads.

Once you download the x86_64 version of Temurin, it will install cleanly.

Now you can run ApacheDirectoryStudio directly from /Applications or your Terminal, and it will work!

Using fdupes to Solve the Data Duplication Problem: I’ve got some dupes!

Well, 11.6 hours later after scanning the NAS with fdupes, I noticed that I’ve got some dupes across my system backups.

# time ./fdupes -R -Sm "/nas/Backups/System Backups/"
2153352 duplicate files (in 717685 sets), occupying 102224.5 megabytes


real	698m15.606s
user	38m20.758s
sys	92m17.217s

That’s 2.1 million duplicate files occupying about 100GB of storage capacity in my backups folder on the NAS. DOH!

Now the real work begins, making sense of what needs to stay and what needs to get tossed in here.

UPDATE: I may give up on fsdupes altogether, and jump to rmlint instead. rmlint is significantly faster, and has more features and functions. Here’s a sample of the output:

# rmlint -t12 -v6 -KY -o "/nas/Backups/System Backups/"
Now scanning "/nas/Backups/System Backups/".. done.
Now in total 3716761 useable file(s) in cache.
Now mergesorting list based on filesize... done.
Now finding easy lint...
Now attempting to find duplicates. This may take a while...
Now removing files with unique sizes from list...109783 item(s) less in list.
Now removing 3917500 empty files / bad links / junk names from list...
Now sorting groups based on their location on the drive... done.
Now doing fingerprints and full checksums..
Now calculation finished.. now writing end of log...
=> In total 3716761 files, whereof 1664491 are duplicate(s)
=> In total  77.66 GB  [83382805000 Bytes] can be removed without dataloss.

HOWTO: Configure XChat Azure on OS X to connect to Freenode using SASL + Tor

Tags: , , , , ,

With all the recent news about the NSA, Prism Surveillance Program and the US Federal Government actively spying on its citizens without cause, I decided to update the detailed HOWTO I posted in early 2011 describing how to connect to Freenode using Xchat (on Linux/FreeBSD) using SASL + Tor. The process is relatively simple, but there is a simplified version now, and it works seamlessly with XChat Azure on OS X, as well as Linux, without having to compile any plugins using GCC.

A win, win, all around! Let’s get started! (click the images below to zoom to full size)

Installing Tor on Your OS X Machine
Configuring Browsers to use Tor (to validate Tor functionality)
Configuring XChat Azure to Speak Through the Tor Proxy
Adding a Freenode Tor Network Server to XChat Azure
Installing the SASL Perl Script to Manage SASL Connections
Connecting to Freenode using SASL + Tor

 

Installing Tor on Your OS X Machine

To get Tor running on your OS X machine, you’ll need to install it. There are several ways to do this, but the easiest is to use the TorBrowser Bundle, package for OS X.

It’s straightforward to install that, just download and install it as you would any other OS X software. Once you’ve got it installed, you’ll see the main Control Panel, shown here:

Vidalia Main Control Panel

If you see the green “onion” icon in your Finder menubar at the top of your screen, you’re up and running and connected to the Tor network. You can check this further by looking at the “Bandwidth Graph” to see if bytes are actually flowing across your connection.

 

Configuring Browsers to use Tor (to validate Tor functionality)

Now you’ve got Tor running, you’ll need to verify that it actually works and that you can send and receive traffic over it.

Open your browser of choice (I use Firefox but any browser will work) and find the configuration option in your browser’s Preferences pane for setting a “Proxy Server”. You’ll want to point it to a proxy server address of 127.0.0.1, port 9150, as shown below.

The reason this isn’t the “standard” Tor port of 9050, is because the Tor Browser Bundle project wanted to ensure that they didn’t collide with a system-installed version of Tor, so they went with 9150 instead.

Firefox Vidalia Proxy Configuration

Once you’ve got that configured, point your browser to the Tor Check Site. You should see output that looks like this:

Tor Browser Check Results

If you’ve gotten this far, you’re almost there! If you see an error message or cannot connect to the Proxy, make sure Tor Browser is running, that it’s showing ‘green’ in your menubar, and that you’re using port 9150, not 9050 in your Proxy port configuration.

 

Configuring XChat Azure to Speak Through the Tor Proxy

Now let’s configure XChat Azure. Open up your XChat Preferences (Command-,) and go to the “Network setup” page. Here is where you’ll configure similar parameters we just used for Firefox above to permit XChat Azure to communicate across Tor.

Configure it to look like the following values:

XChat Azure Vidalia Proxy Configuration

Now ALL of your networks will attempt to use Tor, which may not be what you want. We’ll go over that in a moment, so you can exclude (“bypass”) the proxy for public networks.

 

Adding a Freenode Tor Network Server to XChat Azure

To add a new Network in XChat Azure, you’ll want to go to “File => Network List”, or use Command-S. You’ll see a default network list here.

Click the [+] sign in the lower-left corner to add a new network. You’ll name this “Freenode_Tor” or something similar. Don’t put spaces in the name, this is important.

When you add this network, you’ll want to click on “Show Details” and configure it to look similar to the following two screenshots.

The first tab, you’ll want to double-click the server name line and add a server with the name:

p4fsi4ockecnea7l.onion

And the port:

6697

Make sure you also check the “SSL” box there. This is the SSL port for Freenode servers.

XChat Azure Freenode Onion Tor Configuration

On the second tab, you’ll want to check the two boxes shown. If you want to reject invalid SSL certs (not a bad idea), uncheck that second box.

XChat Azure Freenode SSL Configuration

You’ll also see a checkbox that says “Bypass proxy server”. You’ll want to check that box for all other non-Tor networks, but not this one. We actually want to use the proxy server here, so leave it unchecked.

 

Installing the SASL Perl Script to Manage SASL Connections

Next, we need to install a small script that will be used to manage our SASL connections under XChat Azure. You can find several of those on the Freenode SASL page. I haven’t tested any of the scripts there except the Perl script, so we’re going to use that one for this HOWTO.

Download that Perl script using whatever tool you use, and put it into your $USER/.xchat2/ directory using iTerm or Finder.

Now when you start up XChat Azure, you should see something like this at the top:

[07:58]   Perl interface loaded
[07:58]   Python interface loaded
[07:58]   SASL: auth loaded from /Users/setuid/Library/Containers/org.3rddev.xchatazure/Data/Library/Application Support/XChat Azure/sasl.auth

We need to make sure we set some auth values while this script is loaded. To do that, you’ll run the following command inside the XChat Azure text box:

/sasl set Freenode_Tor <username> <password> PLAIN
/sasl save

So if your Freenode username was ‘foobar’ with a Freenode NickServ password of ‘MyS3cretPas5word’, you’d type:

/sasl set Freenode_Tor foobar MyS3cretPas5word PLAIN
/sasl save

Now your SASL authentication is saved, and you’re ready to connect!

 

Connecting to Freenode using SASL + Tor

Using Command-S (or File => Network List from the app menus), highlight your “Freenode_Tor” network and click the “Connect” button. It will take a few moments, but you should see something that looks like the following:

XChat Azure Freenode Successful Connection
If you see that, you’re all set! Now you can join any channels you wish and be sure that your IRC communications are being anonymized behind the Tor network.

Note: Sometimes you’ll see an error that looks like the one below, when you randomly reach a Freenode server with a wildcard SSL cert.

XChat Azure Freenode Wildcard SSL Cert Error

If you run into this, just close XChat down and restart, or attempt to reconnect to the “Freenode_Tor” network again until you get a proper server in the randomized list.

That’s it, good luck!

Bad Behavior has blocked 1698 access attempts in the last 7 days.